Detailed steps of using counting electronic scales

Counting electronic scale is the perfect embodiment of counting / weighing in the measurement link of enterprises. It uses a high-precision strain weighing sensor, with S51 single-chip microcomputer optimization program design, high weighing accuracy (number of divisions = 30,000), small repeatability error, and display data quickly and accurately. Comprehensive functions: LCD backlight display adapts to various weighing environments, keyboard operation sound prompts, weighing, counting, single weight memory (10 positions), weight / quantity accumulation, weight / quantity alarm, alarm status selection, weight display unit Select (kg kg / lb), AC AC / DC DC power supply, optional RS232 serial data output (can be connected to a computer and serial printer).

Preparations before counting electronic scales

1. Please place the electronic scale on a stable, flat table. Do not place it on a shaking or vibrating table. Use 4 adjusting feet to keep the counting electronic scale stable. Note that the air bubbles in the level should be in the center of the circle.

2. Avoid using the counting electronic scale in places with excessive temperature changes or severe air movement, such as direct sunlight or air outlets of air conditioners.

3. Please use independent power sockets to avoid interference from other electrical appliances.

4. When turning on the power, do not place anything on the weighing pan.

5. Before using the counting electronic scale, please warm up for 15-20 minutes.

6. Please note that when the low power warning symbol () is displayed, it means that the counting electronic scale must be charged.

Counting electronic balance

The operation method of counting electronic scale is as follows:

1 Preheating the counting electronic scale for 10 minutes (in order to make the electronic components of the counting electronic scale circuit system reach thermal stability),

2 Single-sampling: Manually count 100 components with the same single weight (the greater the number, the better, note: you must not count wrong !!!), and then place the number of components in the center of the weighing pan, Use the numeric keys to enter the quantity value (such as 100), and then press the "Single weight setting" key. At this time, the single weight window of the counting electronic scale displays the single weight value of this batch of components. The single weight value displayed at this time is very important. Because it is the average of these 100 components, it is a reference value for the number of calculations later.

3 Single weight storage: Hold down the “Single weight setting” key for about 2 seconds and enter any number key from 0-9. At this time, the single weight value has been stored in the electronic scale (the data will not be lost due to normal shutdown). This allows counting and weighing.

4 Single resetting point: It can be called at any time when restarting each time (press the corresponding number key, and then double-click the “Single Set” key to adjust the stored single-tap data), and it can be counted and weighed at any time.

5 Normal counting: Randomly take out an unknown number of similar components to prevent it from weighing on the weighing pan. The counting electronic scale quickly displays the calculation result, and then manually verifies the accuracy of the displayed result. The verification result is 100% correct and the error is 0.

Counting electronic scales for counting applications in the precision component industry:

    For a long time, the raw material warehouse of an auto parts manufacturing company has manually counted the number of components. Among them, the damping spring (2.3g), which is very light in weight, is time-consuming and labor-intensive, and fails to meet the requirements of enterprise measurement. After adopting ACS-XH-B (weighing 3kg division value 0.1g) counting electronic scale, the counting accuracy and working efficiency are obviously improved. Count the electronic balance.